Lantronix SGX 5150 Command Reference

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 303
action accept
Sets the action to ACCEPT.
action drop
Sets the action to DROP.
clrscrn
Clears the screen.
default action
Restores the default value of action (ACCEPT).
exit
Exits to the config-gateway level.
ip address <text>
Sets the filter IP Address.
ip address filter <num-
ber>
Change to config ip filter level.
no ip address
Removes the filter IP Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
write
Stores the current configuration in permanent memory.
ip address filter 22 (config-ip_filter:22) level commands
action accept
Sets the action to ACCEPT.
action drop
Sets the action to DROP.
clrscrn
Clears the screen.
default action
Restores the default value of action (ACCEPT).
exit
Exits to the config-gateway level.
ip address <text>
Sets the filter IP Address.
ip address filter <num-
ber>
Change to config ip filter level.
no ip address
Removes the filter IP Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
write
Stores the current configuration in permanent memory.
ip address filter 23 (config-ip_filter:23) level commands
action accept
Sets the action to ACCEPT.
action drop
Sets the action to DROP.
clrscrn
Clears the screen.
default action
Restores the default value of action (ACCEPT).
exit
Exits to the config-gateway level.
ip address <text>
Sets the filter IP Address.
ip address filter <num-
ber>
Change to config ip filter level.
no ip address
Removes the filter IP Address.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
write
Stores the current configuration in permanent memory.
ip address filter 24 (config-ip_filter:24) level commands
action accept
Sets the action to ACCEPT.
action drop
Sets the action to DROP.
clrscrn
Clears the screen.
default action
Restores the default value of action (ACCEPT).
exit
Exits to the config-gateway level.
ip address <text>
Sets the filter IP Address.

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm