5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 348
Displays the last 20 commands entered during the current CLI session.
Sets the SNMP system contact information. <text> = system contact information.
system description <text>
Sets the SNMP system description. <text> = description of device.
Sets the SNMP system name. <text> = SNMP system name.
Sets SNMPv3 username for agent.
Stores the current configuration in permanent memory.
Sets the SNMP read-write community string. <text> = name of the read-write community
string to be set.
Enters the SSH Client configuration level.
Exits to the enable level.
Enters the SSH Server configuration level.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
ssh (config-cli-ssh) level commands
Restores the default maximum allowed concurrent incoming SSH sessions.
Restores the default local port to the SSH server.
Sets the maximum allowed concurrent incoming SSH sessions. <number> = number of
sessions.
Sets the local port that the SSH server uses. <number> = local port number.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Displays the SSH server statistics.
Stores the current configuration in permanent memory.
Enters the SSL credentials configuration level.
Delete generated CSR (Certificate Signing Request).
Exits to the enable level.
Generate a new CSR (Certificate Signing Request).
Displays the last 20 commands entered during the current CLI session.
Enters the SSL configuration level.
View generated CSR (Certificate Signing Request).
Stores the current configuration in permanent memory.
static leases 1 (config-dhcpd-static_leases:1) level commands