4: Configuration Using XML
SGX 5150 IoT Device Gateway Command Reference 36
telnet state enable, disable
port
max sessions
authentication enable, disable
terminal (“Instance”
attribute is a
number or
“network”)
terminal type
login connect menu enable, disable
exit connect menu enable, disable
send break <None>
break duration
echo enable, disable
tunnel accept
(Attribute of an
instance is a
number.)
accept mode
local port
protocol
secure protocols
credentials
tcp keep alive
tcp keep alive
interval
tcp keep alive
probes
aes encrypt key
aes decrypt key
initial send
start character <None>
flush start character enable, disable
flush serial enable, disable
block serial enable, disable
block network enable, disable
password password
prompt
email connect <None>
email disconnect <None>
Group Name Group Item Value Name Value Options Additional Info
To Next Page
Loading...
