Lantronix SGX 5150 Command Reference

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 79
cli (config-cli) level commands
clrscrn
Clears the screen.
default inactivity timeout
The default inactivity timeout will apply to CLI sessions.
default quit connect line
Restores the default string to quit the 'connect line', 'telnet', and 'ssh' commands.
enable level password
<text>
Sets the enable-level password.
exit
Exits to the configuration level.
inactivity timeout
<minutes>
Sets the inactivity timeout for all CLI sessions.
line authentication disa-
ble
No password required for Line CLI users.
line authentication enable
Challenges the Line CLI user with a password.
no enable level password
Removes the enable-level password.
no inactivity timeout
No inactivity timeout will apply to CLI sessions.
quit connect line <con-
trol>
Sets the string used to quit the 'connect line', 'telnet', and 'ssh' commands. The characters
may be input as text or control. A control character has the form <control>C.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
ssh
Change to menu level for SSH configuration and status.
telnet
Change to menu level for Telnet configuration and status.
write
Stores the current configuration in permanent memory.
client (ssh-client) level commands
clrscrn
Clears the screen.
default user <username>
command
Restore the user command to the default login shell
delete all known hosts
Remove all known hosts
delete all users
Remove all users
delete known host
<server>
Remove known host
delete user <username>
Delete the named user
exit
Exits to the ssh level.
known host <server>
Set known host RSA or DSA key
no known host <server>
dsa
Remove known host DSA key
no known host <server>
rsa
Remove known host RSA key
no user <username> dsa
Remove user DSA key
no user <username> rsa
Remove user RSA key
show
Show SSH Client settings
show history
Displays the last 20 commands entered during the current CLI session.
show known host <serv-
er>
Show known host RSA and DSA keys
show user <username>
Show information for a user
user <username>
Set username and RSA or DSA keys
user <username> com-
mand <command>
Customizes the user command
user <username> gener-
ate dsa 1024
Generate DSA public and private keys

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm