Lantronix UDS 1100 - 1: Using this Guide; Purpose and Audience; Chapter Summary

UDS1100 Device Server User Guide 9
1: Using This Guide
Purpose and Audience
This guide provides the information needed to configure, use, and update the
Lantronix® UDS1100 device server. It is for system administrators and those
responsible for installing and maintaining the UDS.
Chapter Summary
The remaining chapters in this guide include:
Chapter Description
2: Introduction
Describes the main features of the UDS and the protocols it
supports.
3: Installation of UDS1100
Provides information for installing your unit and getting it up and
running using DeviceInstaller or a serial port connection.
4: Using DeviceInstaller
Instructions for viewing the current configuration using
DeviceInstaller.
5: Configuration Using Web-
Manager
Details using the Web-Manager to set parameters such as port and
server properties.
6: Configuration via Telnet
or Serial Port (Setup Mode
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
7: Setup Mode: Server
Configuration
Details the network (server) settings
8: Setup Mode: Channel
Configuration
Details the serial port settings.
9: Setup Mode: Advanced
Settings
Details expert and security settings and explains how to reset the
unit to factory default values.
10: Firmware Upgrades
Provides instructions for obtaining the latest firmware and updating
the UDS.
11: Monitor Mode
Provides instructions for accessing and using the command line
interface to monitor the network and diagnose problems.
A: Troubleshooting and
Contact Information
Describes common problems and error messages and how to
contact Lantronix Technical Support.
B: Connections and Pinouts
Provides descriptions and illustrations of connection hardware.
C:Technical Specifications
Lists technical specifications for the UDS.
D: Mounting Brackets
Provides drawings and dimensions of the unit's mounting brackets.