Laser Pegs Runners 1320 A

To Next Page

Please read manual before you begin! Failure to

follow this manual’s instructions may result in

damage to the Power Base and/or Laser Pegs®.

Not adhering to these directions will void the

manufacturer’s warranty. Packing has to be kept

since it contains important information.

To construct with Laser Pegs®, slide two pieces together to form a connection.

Slide each piece on and o smoothly. The 90° pegs are essential to construction

but they DO NOT ILLUMINATE.

This manual is copyright and cannot be reproduced or used online without Laser

#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures

LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com

Compatible with other construction kits

Laser Pegs

link that

allows you to connect to

other construction kits.

Allows you to connect to other

construction kits.

Allows you to connect to

both Laser Pegs® and other

construction kits.

CAR RUNNERS™ Power Base

www.LaserPegs.com

Each Laser Peg® is color coded on the circuit board inside

each shape. There is No LED In The 90 Degree Peg.

Color

Code

Connecting Pegs

RUNNERS™ POWER BASE

Switch power button to

cycle through the Runners™

power settings.

LIGHT/OFF/ON/FLASH

Power

Button

Peg Holes

Connecting Laser Pegs® to RUNNERS™ POWER BASE

AVOID DAMAGE TO PEG HOLES

WARNING:

CHOKING HAZARD-Small parts.

Not for children under 3 yrs.

Do not submerge in water.

All additional model instructions can

be downloaded at www.LaserPegs.com

MODEL INSTRUCTIONS

Construction Compatible

Laser Pegs

Stackable

EN71, RoHS COMPLIANT

This product complies to

all safety requirements

of ASTM F 963

WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more

pegs you use, the quicker you will deplete your battery power! As the power

weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically

the reds and yellows) and some won’t. When the Laser Pegs® dim the Laser Pegs®

are not broken, they just need stronger batteries.

You have 2 simple options...

1. Change the batteries.

2. Use high quality batteries. They will last a little longer, but they will still deplete

rapidly the more laser pegs you connect!

*To avoid short-circuits, keep metal objects and

other un-authorized materials from obstructing

the peg holes.

1320 A

RUNNERS™

For Boys And Girls

Ages 5 And Up

LIGHTED

CONSTRUCTION SET INCLUDES:

• 4 Laser Pegs®

• 24 Construction Parts

• Runner Power Base

• Instruction Manual

Requires 3 AAA Batteries

Batteries NOT

Included

Laser Pegs® Parts List

Construction Parts List

STACKABLE

6 Models+

Any creation you can build

There is No LED In The 90 Degree Peg

Never connect more than 20

pegs at one time.

Remove the Philips

head screw with a

4mm screw driver.

Requires (3AAA) Batteries

When Using Batteries

1. Remove screws.

2. Place three AAA batteries in the correct

position - as displayed inside the Runners™

Power Base.

3. Switch power button setting to

light/on/ash

4. Switch speed setting to engage motor.

5. Do not mix old and new batteries.

6. Do not mix alkaline, standard (carbon-

zinc), or rechargeable (nickel-cadmium)

batteries!

7. Exhausted batteries are to be removed

from the power base.

8. Never connect more than 20 Laser Pegs®

9. Non-rechargeable batteries are not to be

recharged.

10. Rechargeable batteries are only to be

charged under adult supervision.

11. Rechargeable batteries are to be removed

from the toy before being charged.

12. Batteries are to be inserted with the

correct polarity.

13. The supply terminals are not to be short-

circuited.

Speed

Settings*

Speed

Settings*

POWER SETTINGS

SPEED SETTINGS

Allows you to construct

with Laser Pegs®.

Construction Part Connection

The Laser Pegs® Runners™ power base allows you to build with Laser Pegs® and

construction parts to form models. It is battery operated to run on its own.

LIGHT - Illuminates your model

OFF - Turns power o

ON - Turns on motion and light

FLASH - Light Flash with motion

Battery

Compartment

The Runners™ power base will not operate on its own if the speed setting is in neutral.

*If your speed setting is in neutral the Runners™ will not run by itself.

Once you have switched the speed setting to either medium or fast

the motor will engage.

Hitch

Screw

Requires (3AAA) Batteries

Push Switch

(CENTER)

Push Switch

MEDIUM

NEUTRAL FAST

Need help?

Do you have a question about the Laser Pegs Runners 1320 A and is the answer not in the manual?

The LASER PEGS® RUNNERS™ is a lighted construction set designed for children aged 5 and up, allowing them to build various models with illuminated parts. This set includes 4 Laser Pegs®, 24 construction parts, a Runner Power Base, and an instruction manual. It requires 3 AAA batteries, which are not included.

Function Description:

The core function of the LASER PEGS® RUNNERS™ is to enable the construction of models that can light up and, in the case of the Runner Power Base, move. The Laser Pegs® are the illuminated components, while the construction parts allow for diverse building possibilities. The Runner Power Base is battery-operated and provides both power for the lights and motion for the constructed models. The set is compatible with other construction kits, expanding building options.

Important Technical Specifications:

Power Source: Requires 3 AAA batteries (not included).
Voltage: 4.5V (3 x AAA or LR03).
Age Recommendation: For ages 5 and up.
Safety Compliance: EN71, RoHS COMPLIANT, ASTM F963.
Laser Pegs®: The set includes 4 Laser Pegs® that illuminate. There are no LEDs in the 90-degree pegs or the stackable pegs.
Maximum Pegs: Do not connect more than 20 Laser Pegs® at one time to avoid damage or rapid battery depletion.
Construction Compatibility: Designed to be compatible with other construction kits.

Usage Features:

Connecting Pegs: To construct models, slide two pieces together. The 90-degree pegs are crucial for construction but do not illuminate.
Runner Power Base: This base allows users to build with Laser Pegs® and other construction parts. It is battery-operated and enables the constructed model to move.
- Peg Holes: Designed for constructing with Laser Pegs®.
- Construction Part Connection: Allows connection to other construction kits.
- Hitch: Used for connecting multiple Runner Power Bases or other components.
- Battery Compartment: Houses the 3 AAA batteries.
Power Button: A switch on the Runner Power Base cycles through different power settings:
- LIGHT: Illuminates the model.
- OFF: Turns power off.
- ON: Activates motion and light.
- FLASH: Activates light flash with motion.
Speed Settings: The Runner Power Base has three speed settings:
- MEDIUM (III|Push Switch): Engages the motor at a medium speed.
- NEUTRAL (Push Switch (CENTER)): The Runners™ will not operate on its own in this setting. The motor will engage once switched to medium or fast.
- FAST (Push Switch IIII): Engages the motor at a fast speed.
Battery Installation:
1. Remove screws from the battery compartment.
2. Insert three AAA batteries in the correct polarity as displayed inside the Runner Power Base.
3. Replace the screws.
Color Code: Each Laser Peg® is color-coded on the circuit board inside its shape.
Model Instructions: Additional model instructions can be downloaded from www.LaserPegs.com.
Changing Tread: The manual mentions additional tires or tracks sold separately, indicating expandability for different vehicle types.
Hitching Runners: Multiple Runner Power Bases can be hitched together to create larger, more complex moving models.

Maintenance Features:

Battery Care:
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Exhausted batteries must be removed from the power base.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision and must be removed from the toy before charging.
- Batteries must be inserted with the correct polarity.
- The supply terminals are not to be short-circuited.
Troubleshooting Dimming Lights: If Laser Pegs® dim, it indicates weakening battery power. Users have two options:
1. Change the batteries.
2. Use high-quality batteries, which may last longer but will still deplete with more Laser Pegs® connected.
General Warnings:
- Choking Hazard: Contains small parts, not suitable for children under 3 years.
- Do not submerge the device in water.
- Avoid obstructing peg holes with metal objects or unauthorized materials to prevent short-circuits and damage.
- Always read the manual before use; failure to follow instructions may void the manufacturer's warranty.
- Keep the packing as it contains important information.