LaserLiner CompactCube-Laser 3 User Manual

13
CompactCube-Laser 3
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure
it produces accurate measurement results. We recommend carrying out
calibration once a year.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing
for longer periods. Store the device in a clean and dry place.
EU directives and disposal
This device complies with all necessary standards for the
free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=comcublas3pl
Technical data
Self-levelling range ± 3°
Accuracy ± 0.5 mm / m
Operating range (depending
on room illumination)
15 m
Laser wavelength
635 nm
Laser class
2 / < 1 mW
Power supply 3 x 1.5 V alkaline batteries (type AAA)
Operating time
with laser cross at front
with all laser lines
approx. 20 hours
approx. 9 hours
Operating conditions
0…40°C, max. humidity 80% rH,
no condensation, max. working altitude
4000 m above sea level
Storage conditions
-10…70°C, max. humidity 80% rH
Dimensions (W x H x D) 69 x 69 x 65 mm
Weight (incl. batteries) 285 g
EN
Subject to technical alterations. 18W10

LaserLiner CompactCube-Laser 3 Specifications

General

Brand	LaserLiner
Model	CompactCube-Laser 3
Category	Laser Level
Language	English