LaserLiner LaserRange-Master X2 - Operating the LaserRange-Master X2; Power On;Off and Basic Measurement; Device Settings and Units; Measurement Function Selection

LaserRange-Master X2
11
3 sec
2x
2x
3x
3x
1x
1x
1x
1x 2x 3x 4x
1x
2x
1x
Change unit of measure:
Press and hold button:
m / _‘ _“ / inch / ft
Delete the last
measured value:
Change measurement function:
area area addition volume length
Change measurement point (reference):
rear front
Switch on, measure and switch off:
device on laser on measure device off
Length measurement:
device on laser on measure
Area measurement:
device on area 1. measure- 2. measure-
ment ment
GB
Manual_LRM-X2_Rev.0911_Part_1.indd 11 23.09.11 10:57