To Next PageTo Next Page
Need help?Do you have a question about the LaserLiner StarFinder and is the answer not in the manual?
General| Product color | Black, White |
|---|---|
| Auto calibration | Yes |
| Detectable materials | Live cable |
| Voltage range detection | 110 - 230 V |
| Battery type | 6LR61 |
| Battery voltage | 9 V |
| Battery technology | Alkaline |
| Number of batteries supported | 1 |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 38 mm |
|---|---|
| Width | 85 mm |
| Height | 180 mm |
| Weight | 163 g |
| Package depth | 60 mm |
| Package width | 123 mm |
| Package height | 313 mm |
Shows the maximum detection level achieved during scanning.
Displays detection signals and operational status.
Indicates the currently selected mode: STUD, CAL, or AC.
Allows adjustment of detection depth for STUD-SCAN.
Provides an alert for the presence of live electrical wires.
Button to power on the device and switch between STUD/AC SCAN modes.
Button to initiate the device calibration process.
Instructions for correctly installing the 9V battery.
Steps to switch on the StarFinder device.
Guidance on choosing between STUD-SCAN and AC-SCAN modes.
Details on setting detection depth for studs (Normal, Deep).
Step-by-step guide to calibrate the device before accurate use.
Advice for optimal detection and avoiding interference during scanning.
Instructions for using the device to locate live electrical wires.
Lists materials that may hinder or affect accurate detection.
Explains the 2-year warranty coverage, terms, and exclusions.
