Need help?Do you have a question about the LaserPecker 4 and is the answer not in the manual?
General| Chuck diameter range | 52mm-80mm |
|---|---|
| Engraving maximum diameter | 200mm |
| Engraving diameter range (Double-step Jaw) | 0mm-128mm |
| Engraving diameter range (Single -step Jaw) | 66mm-145mm |
| Engraving diameter range (Stud Component） | 13mm- 78mm |
| Precise control | 0.014° |
| Idling movement speed | 140.625 degrees/second |
| Fastest engraving speed | V= 360/200/128/0.00012=117.1875 degrees per second |
| Slowest engraving speed | V= 360/200/128/0.00012=117.1875 degrees per second |
| Appearance | Anodic oxidation of aluminum alloy |
| Operating system | Support iOS 9.0+，Android 6.0+，MacOS 10+，Windows 10+ |
| Power input | 5V/1A |
Weight and Dimensions| Size | 308 108 99mm |
|---|---|
| Weight | 1.7kg |
To Next Page