F.7.3.12 - 0315 Data Sheets are subject to change without notice. For latest revision, visit laticrete.com. DS-683.0-1118
LATAPOXY
®
310 Cordless Mixer
1. PRODUCT NAME
LATAPOXY
®
310 Cordless Mixer
2. MANUFACTURER
LATICRETE International, Inc.
1 LATICRETE Park North
Bethany, CT 06524-3423 USA
Telephone: +1.203.393.0010, ext. 1235
Toll Free: 1.800.243.4788, ext. 1235
Fax: +1.203.393.1684
Website: laticrete.com
3. PRODUCT DESCRIPTION
The LATAPOXY 310 Cordless Mixer is an exclusive dual component
cordless mixer that quickly and easily dispenses LATAPOXY 310
Stone Adhesive onto ceramic tile, porcelain and stone veneers.
Hundreds of square feet can be installed per day with less effort and
greater success with this system. Compared to other cladding
installation systems such as mechanical anchors, plaster & wire and
thin-set, the LATAPOXY 310 system provides unmatched speed,
versatility and productivity. Perfect for all interior cladding of tile, stone
and porcelain veneers as well as approved exterior applications.
Uses
▪ Used exclusively with LATAPOXY 310 Stone Adhesive to install
various stone and tile on vertical surfaces
▪ Virtually any interior cladding application of stone or tile in
lobbies, malls, store fronts, banks, schools, hospitals etc
▪ For cladding exterior veneer facades*
▪ Jobs requiring fast turnaround time
▪ Great for tight spaces and on scaffolding
▪ * Consult LATICRETE Technical Services for approval prior to
all exterior applications.
Advantages
▪ Unmatched speed & productivity for vertical installations
▪ Cordless for convenience—great for scaffolding and tight areas
▪ Patented design and gear system
▪ High output motor for long life
▪ Automatic reverse
▪ Speed and dosing controls for easier operation
Suitable Substrates
▪ Concrete
▪ Concrete Masonry Units (CMU)
▪ Brick Masonry
▪ Exterior Glue Plywood
▪ Cement Backer Board
▪ Steel
Packaging
▪ 9.5LB (4.3KG) CARTON
Limitations
▪ Consult LATICRETE Technical Services for approval on exterior
applications.
▪ Not for use with any adhesives other than LATAPOXY 310
Stone Adhesive.
▪ LATAPOXY 310 Stone Adhesive MUST be conditioned to at
least 65°F (18°C) prior to use. Consult LATAPOXY 310 Stone
Adhesive data sheet DS 679.0 and DS 679.3.
▪ Do not abuse, misuse, or modify tool in anyway
▪ Do not use for any application other than those described
herein.
▪ Follow proper installation and operation instructions in Owner’s
Manual DS 683.5.
▪ Repairs may only be made by approved LATICRETE personnel.
Cautions
▪ Read & understand battery pack and charger manual included
in LATAPOXY 310 Cordless Mixer fully prior to use.
▪ Failure to condition material to 65°F (18°C) prior to use will
cause failure of cartridge and incomplete adhesive mix.
4. TECHNICAL DATA
Physical Properties
Cordless Mixer Tool
Weight
Cordless Mixer
Dimensions
17" x 3.5" x 12.5 (43 x 9 x 31.75
cm)
To Next Page
General