If the Alias transmitter settings have been adjusted incorrectly for optimal flight performance, the transmitter should be returned to the default settings.
To return the transmitter to the default settings:
1. Turn the transmitter off.
2. Press and hold both AUX buttons.
3. While holding both AUX buttons, turn the transmitter on.
4. Continue holding the AUX buttons for 3 seconds until the transmitter beeps.
5. The transmitter is now reset and is in binding mode.
6. Connect a charged battery to the helicopter.
7. Wait 10 seconds for the helicopter to enter Bind Mode.
8. When binding is complete, the LEDs on the helicopter and on the transmitter will turn solid, and
the LCD on the transmitter will display the Disarmed Flight Screen (A).
Returning the Transmitter
to Default Settings
LaTrax.com
6200 Traxxas Way, McKinney, Texas 75070, Phone: 972-265-8000, Fax: 972-265-8011, Email: support@LaTrax.com
Transmitter
AUX1 button AUX2 button
A
Rev 131104
To Next Page
Need help?
General
Weight and Dimensions
