Need help?Do you have a question about the LAUMAS TLB4-ANA and is the answer not in the manual?
General| Output Signal | 4-20 mA, 0-10 V, 0-5 V |
|---|---|
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20 to +70 °C |
| Load Resistance | ≤ 500 Ω (current output) |
| Output Impedance | 500 Ω (current output) |
Guidelines for safe operation, keeping away from heat, moisture, and hazardous areas.
Recommendations for instrument and load cell installation, including cabling and earthing.
Displaying load cell response signals in mV using the instrument's quick access function.
Detailed resistance and voltage measurements using a multimeter for load cell verification.
Information on power supply grounding, load cell connections, and RS485 network setup.
Visual guide to instrument wiring and specific instructions for 4-wire load cells.
Description of the main and secondary functions of the instrument's LEDs.
How to use the keypad for navigation, parameter entry, and menu access.
Setting load cell rated values like full scale, sensitivity, and resolution for theoretical calibration.
Performing net weight measurements by zeroing the gross weight with an input or key press.
Locking or unlocking the instrument's keypad and display remotely.
Lists additional alarms specific to W series instrument connections.
Procedures to secure access to instrument menus by locking and unlocking them.
Instructions for data deletion, program selection, and restoring factory settings.
Choosing the appropriate operating program (base, interval, range) for the application.
Securing the instrument interface by locking the keypad and/or display.
To Next Page