LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT User Manual (English)

Questions and Answers:

M
Mary RodriguezAug 7, 2025
How to troubleshoot camera issues (lights, video, rotation) with LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments?
- A
  Angela SullivanAug 7, 2025
  If the camera on your Laval Underground Surveys Analytical Instruments isn't working correctly, experiences intermittent issues, or lacks power/functions (lights, video, or rotation), consider the following: * **Damaged Cable Head:** Rebuild it using a Cable Head Repair Kit. * **Poor Cable Connections:** Check all connecting cables. * **Low Battery/Improper Fuse Installation:** Verify and correct the fuse installation on the battery. Test with an Auxiliary Power Cable. Check the LCD Voltmeter with the battery under load and disconnected from the charger. Charge the battery for 24 hours and recheck. * **Extreme Temperature:** Ensure the temperature is within the range of 32° to 122° F (0° to 50° C). * **Internal issue:** Send CU and Camera to Laval.
S
Sharon RamosAug 11, 2025
What to do if my LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments monitor has “No Signal”?
- M
  Michael VargasAug 11, 2025
  If your Laval Underground Surveys Analytical Instruments monitor displays a 'No Signal' message, here’s what you can do: * **Damaged Cable Head:** Rebuild the cable head using a Cable Head Repair Kit. * **Low Battery:** Use an auxiliary power cable. Check the LCD Voltmeter with the battery under load and disconnected from the charger. Charge the battery for 24 hours and recheck. * **Wrong Monitor Input Selected:** Ensure Monitor Input AV 1/Channel 1 is selected from the Monitor menu. * **Internal issue:** Send CU and Camera to Laval.
C
Cristina SmithAug 16, 2025
Why won't the winch motor operate on my LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments?
- K
  Kenneth BlackAug 16, 2025
  If the winch motor on your Laval Underground Surveys Analytical Instruments will not operate, consider these potential causes and solutions: * **Low Battery/Improper Fuse Installation:** Check and correct the fuse installation on the battery. Test with an Auxiliary Power Cable. Check the LCD Voltmeter with Battery under load and disconnected from the Charger. Charge Battery 24 hours and recheck. * **Defective Winch Motor:** Replace the winch motor. * **Damaged Forward/Reverse Switch:** The CU needs to be sent in to replace the switch.
S
Steve WilliamsAug 19, 2025
What to do if my LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments monitor has no power?
- R
  Robert AyersAug 20, 2025
  If your Laval Underground Surveys Analytical Instruments monitor has no power, try the following: * **Low Battery:** Use an auxiliary power cable. Check the LCD Voltmeter with the battery under load and disconnected from the charger. Charge the battery for 24 hours and recheck. * **Monitor plug is not connected correctly:** Check the monitor plug (above the panel) and ensure it is connected properly. * **Internal Issue:** Send the CU to Laval.
K
Kelli WhiteAug 25, 2025
Why is the depth counter not accurate on my LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments?
- L
  lbellAug 25, 2025
  If the depth counter on your Laval Underground Surveys Analytical Instruments is not accurate, here are a few things to check: * **Cable Slippage on Roller:** Ensure the cable is making contact with the roller and the top tension roller is not loose. Also, make sure the cable on the spool is even and laid nicely. * **Set Screw(s) in Counter Roller/Encoder is loosened from counter shaft:** Check and correct. * **Cable is running through a secondary pulley:** Ensure the cable runs straight down from the counter pulley before reaching any secondary pulley. * **System needs to be calibrated:** Follow the steps to calibrate by reel in the current setup. * **Encoder is faulty (very rare):** Send the winch or encoder into Laval.
M
Matthew RiceAug 29, 2025
What causes the battery to not charge on LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments?
- J
  Jonathon WrightAug 29, 2025
  If your Laval Underground Surveys Analytical Instruments battery will not charge, consider the following: * **Battery Fuse Not Installed Properly:** Check and correct the fuse installation on the battery. * **Battery Completely Dissipated:** Replace the battery; it should not be left without charging for long periods. * **Battery is being Charged while under load:** Disconnect from the load and allow the battery to charge for 12-24 hours.
A
anthony63Sep 2, 2025
What to do if video will not playback on LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Analytical Instruments?
- K
  Kathy SimpsonSep 2, 2025
  If video will not playback on your Laval Underground Surveys Analytical Instruments, it might be due to: * **Cannot Replay Video on Control Unit or Computer:** Files may be corrupted due to improper saving or insufficient space. Remove files to create more space and retry saving the video by pressing ESC. * **Menu is not showing up on screen:** The keyboard may not be charged. Ensure the keyboard is properly charged and the black receiver is plugged into the Control Unit. * **No recordings found on control unit after survey:** The recording was not saved properly.

LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Specifications

General

Brand	LAVAL UNDERGROUND SURVEYS
Model	R-CAM 1000 XLT
Category	Analytical Instruments
Language	English

LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT User Manual

Table of Contents

Questions and Answers:

LAVAL UNDERGROUND SURVEYS R-CAM 1000 XLT Specifications