EN
MACHINE PROGRAMMING
C to exit
Enter confirm
If you do not want to wash the coffee group,
press the
Esc key. To run the coffee unit wash
place a glass on the tray and press the
Enter
button.
12
The display shows::
Open lever
Close lever
Open and close the capsule loading lever and
press the Enter button. The mixer wash be-
gins. After the release of about 100 cc of water
washing is over and the machine is ready.
13
Press the Esc button two times to exit the
Run washing and return to the Menu
user
.
MENU USER >> ENERGY SAVING
The machine is programmed to be able to go
into a power saving mode after a certain period
of inactivity. The value can be changed. To bring
the machine into ready condition, open/close the
capsule loading lever or push any button.
1
Select the Energy Saving button using the Up/
Down
buttons and pressing the Enter button.
Menu user
Energy saving
In the Energy saving environment, the fol-
lowing items are present:
X NO
X YES
MENU USER >> ENERGY SAVING >> NO
With this setting, the machine never goes into
power saving mode.
2
Select the item NO using the Up/Down but-
tons and pressing the
Enter button.
Energy saving
NO
3
Press the Enter button to confirm.
NO
Press enter
The default value is restored.
NO
Executed
4
Press the Esc button to return to the En-
ergy saving
environment.
MENU USER >> ENERGY SAVING >> YES
With this setting, the period of inactivity is deter-
mined (expressed in hours) after which the ma-
chine enters into energy saving mode.
5
Select the item YES using the Up/Down but-
tons and pressing the
Enter button.
Energy saving
Yes
6
Use the Up/Down buttons to set the inac-
tivity period
000 after which the machine
should be in energy saving mode and press
the
Enter button to confirm the choice.
Yes
En.sav.dly 000h
7
Press the Esc button to exit the Energy
saving
environment and return to the Menu
user
.
8
Use the Up/Down buttons to return to other
menus (
Menu technician/Menu loader)
or press the
MENU button to exit the pro-
gramming environment.
MENU TECHNICIAN
The Menu technician is an environment
dedicated to technical service personnel
with specific competence for any access it is
necessary to enter the password. To modify
it, access the
Menu technician >> Pw
set menu
.
The default password is 00000.
MENU TECHNICIAN >> PASSWORD
1
Select the Menu technician item using the
Up/Down buttons and pressing the Enter
button.
Menu
Technician
2
The display will flash five icons showing
the
5-digit numeric password. Set the de-
sired number by pressing the
Up/Down
buttons and confirm with
Enter. Repeat
the operation for all five boxes.
Password?
00000
Keep your password in a safe place.
A lost password requires a reset of the machine’s
software and means the loss of all settings other
than the manufacturer’s settings.
3
The display shows the Menu technician en-
vironment.
Menu technician
Parameters
In the
Menu technician the following items
are present:
X Parameters
X Powder calibration
X Selections
X Data reading
X Password set menu
X Language
X Credits
X Fan management
X Layout
X 'HIDXOWFRQ¿JXUDWLRQ
MENU TECHNICIAN >> PARAMETERS
1
Select the Parameters item using the Up/
Down
buttons and pressing the Enter button.
Menu technician
Parameters
In the Parameters environment, the follow-
ing items are present:
X Coffee temperature
X Solubles temperature
X Pre-time solubles
X Post-time milk
X Post-time chocolate
MENU TECHNICIAN >> PARAMETERS >>
COFFEE TEMPERATURE
2
Select the Coffee temperature item us-
ing the
Up/Down buttons and pressing
the
Enter button.
Parameters
Coffee temp.
3
To change the temperature in the coffee
boiler (110 in this example) use the
Up/
Down
buttons and press Enter to confirm.
Parameters
Coffee temp. 110
4
Press the Esc button to return to the Pa-
rameters
environment.
MENU TECHNICIAN >> PARAMETERS >>
SOLUBLES TEMPERATURE
5
Select the item Solubles temperature us-
ing the
Up/Down buttons and pressing the
Enter button.
Parameters
Solub.temp.
6
To change the temperature in the soluble boiler
(090 in this example) using the
Up/Down but-
tons and pressing
Enter to confirm.
Parameters
Solub.temp. 090
MENU TECHNICIAN >> PARAMETERS >>
PRE-TIME SOLUBLES
The Pre-time solubles item indicates the
time between the beginning of the dose counter
and the beginning of the soluble power dispens-
ing and is expressed in hundredths of seconds
(cs).
10
Select the item Pre-time solubles using
the
Up/Down buttons and pressing the Enter
button.
Parameters
Pre
-
solub
11
To change the Pre-time solubles item (060
in this example) use the
Up/Down buttons
and press
Enter to confirm.
23
To Next Page
Loading...
