LAVAZZA firma INOVY MINI User Manual

Welcomes the customer and advises reading the instruction booklet for proper use and maintenance.

Defines the appliance's proper usage and restrictions for different environments and age groups.

Details safe placement requirements, temperature limits, and outdoor/surface considerations.

Specifies requirements for connecting the machine to the power source, including grounding.

Provides warnings and instructions regarding the safe handling and condition of the power cord.

Warns against contact with water, electrocution risks, and protecting children.

Warns about touching hot parts and potential hot liquid splashes.

Provides instructions for safe cleaning, including unplugging and using mild detergents.

Instructs on proper storage for long periods and fault handling by authorized centers.

Specifies water type, fill level, compatible capsules, and usage warnings.

Explains the symbol for separate disposal and the importance of environmentally friendly recycling.

Identifies and illustrates the various parts of the coffee machine using labels.

Details the specific functions of the buttons on the control unit for brewing coffee.

Explains the meaning of different light signals for power, heating, and readiness.

Describes the light behavior during espresso and free dose beverage dispensing.

Details indicator light behavior when the water tank is empty during brewing.

Explains stand-by activation and the process for programming coffee doses.

Describes lights for a full capsule drawer and what red flashing lights indicate.

Provides essential steps for initial setup, including placement and rinsing the tank.

Details the use and benefits of an optional water filter accessory.

Guides the user through connecting power, filling the tank, and initial heating cycle.

Details the steps for the final rinsing cycles after initial preparation and tank filling.

Explains how to position cups for different coffee types (espresso vs. glass).

Describes the automatic and manual activation of the machine's energy-saving stand-by mode.

Guides on preheating the cup with hot water and operating the capsule loading lever.

Instructs on correctly inserting Lavazza capsules into the compartment and closing the lever.

Details the steps and indicators for initiating and completing espresso and free dose brewing.

Provides guidance on what to do if power or water supply is interrupted during brewing.

Informs about the indicator for a full capsule drawer and the reset procedure.

Details how to program custom coffee volumes for each button.

Step-by-step guide for setting custom volumes, including handling interruptions.

General guidelines for cleaning components, avoiding harsh chemicals, and water circuit maintenance.

Instructions for emptying and cleaning the used capsule drawer and drip tray.

Details how to remove and clean the coffee dispensing spout.

Provides guidance on when and how to descale the machine using the recommended agent.

Highlights crucial points like not using vinegar and completing the cycle without interruption.

Details the steps for rinsing the machine thoroughly after descaling.

Lists common problems, their possible causes, solutions, and expected results.

Addresses issues with the machine not powering up or taking too long to heat.

Provides solutions for a noisy machine and issues related to power supply.

Guides on resolving water leaks and problems with the capsule loading lever.

Explains warning lights and solutions for coffee dispensing too fast or lacking creaminess.

Solutions for cold coffee, insufficient/excessive dispensing, and steam issues.

Addresses slow coffee dispensing and issues with buttons or LEDs not working.

Lists the machine's electrical, physical, and capacity specifications.

States the machine's compliance with EU directives and provides a web address for the full declaration.