LAVAZZA FLAVIA CREATION 600 - Introducing the Flavia C600 System; System Overview and Benefits

10
The one brewer that satises your entire oce. We know that as an
oce manager, you have to deal with hassles on a regular basis. We set
out to change that. Introducing the new FLAVIA C600. It’s a connected
beverage system designed to take more work o your plate — and put
more variety into your coworkers’ cups,
• Unmatched selection of coees, teas, hot chocolate & specialty
drinks.
• Flexibility to add features as your needs change.
INTRODUCING THE FLAVIA
CREATION 600 SYSTEM
Ensure that the brewer is placed on a stable level surface capable of
safely supporting the weight noted above.
ELECTRICAL SUPPLY FOR INSTALLATION
It is important to have a power supply ready for an ecient brewer
installation.
A suitably rated and protected (i.e., via RCD and/or MCB) incoming
supply is required. The brewer must be connected to the supply via an
earthed/grounded wall socket/outlet, ideally incorporating a switch.
Please refer to the rating label on the back of the brewer for details of
the supply voltage, frequency, and power rating required to operate
the brewer. Use only one brewer per socket/outlet and ensure it is
earthed/grounded. The brewer is tted or comes supplied with a mains
lead that is a minimum of 1.75 m (5’9”) in length. Only this lead should
be used. No old leads should be re-used.
Note: If unsure about any installation requirements,
consult an electrician and/or a plumber.
BREWER TECHNICAL
DATA FOR INSTALLATION CONT.