LAVAZZA OMNIA - Daily Cleaning; Milk Unit Cleaning Procedure

DAILY CLEANING
QUICK START GUIDE
Machine’s milk unit must be cleaned at the end of each day.
If cleaning missed, the machine will automatically block milk brewing until this has been completed.
Press System Clean button
and follow steps shown
on machine display.
Disassemble the milk unit and
clean the parts under running
water using the brush provided.
Reassemble the milk unit
and place back into machine.
1
4
2
5
3
6
Place the milk tube in a container (6
Oz. min.) containing cleaning solution
(hot water + milk cleaner). Place an
empty glass under the spouts ( 6 Oz.
min.). Press OK to confirm and start
the cleaning process.
Place the milk tube in a container
containing fresh water ( Oz. min.)
to rinse the system and complete
the process. Machine is ready
to brew your beverage.
OMNIA
SYSTEM BOOT
I) Lower the coee spout
II) Remove the plastic cover
III) Press the left button on the milk unit
IV) Remove the milk unit
II
I
III
IV
SEE OTHER SIDE FOR DAILY CLEANINGSEE OTHER SIDE FOR HOT BEVERAGES PREPARATION