Need help?Do you have a question about the LawnBoss CG430 and is the answer not in the manual?
Essential safety rules, user qualifications, and responsibilities before operation.
Guidelines for appropriate clothing, eye, and ear protection.
Safe working conditions, tool usage, fuel handling, and maintenance precautions.
Pictograms illustrating general safety, PPE, and operational hazards.
Pictograms for risks like projection of objects, noise, and intoxication.
Description of safety components like helmet, gloves, and harness.
Pictograms warning about hot surfaces, fire, and explosion hazards.
Detailed technical data for CG270, CG340, CG430, and CG520 models.
Instructions for assembling components like handles and safety guards.
Steps for mounting safety guards, adjusting the harness, and balancing the machine.
Lists and identifies the primary components of the brush cutter.
Procedures for fuel mixture, safe handling, and starting the engine.
Recommendations for running the engine at moderate RPM during the initial hours of operation.
Guidance on selecting protective gear, cutting methods, and avoiding obstacles.
Instructions and warnings for safely using the 3-tooth blade, including cutting positions.
Steps for adjusting the carburetor for normal use and high-speed settings.
Instructions for gearbox lubrication, post-use cleaning, and storage.
Troubleshooting guide for issues like power loss, engine stopping, and filter maintenance.
Addresses problems like bad cut quality, overloaded cutting, and worn blades.
Important warnings regarding fuel mixture conformity, approved tools, and forbidden blades.
Diagram and list of engine parts for 1E34F, CG260A/B.
Diagram and list of machine parts for CG260B.
Diagram and list of engine parts for 1E36F-2A, CG330A/B.
Diagram and list of machine parts for CG330B.
Diagram and list of engine parts for 1E40F-5A, CG430A/B.
Diagram and list of machine parts for CG430B.
CE conformity declaration, sound power levels, and cutting dimensions.
General| Engine Type | 2-stroke, air-cooled |
|---|---|
| Displacement | 42.7 cc |
| Power | 1.25 kW |
| Fuel Tank Capacity | 1.2 L |
| Cutting Width (Blade) | 255 mm |
| Cutting Width (Nylon) | 415 mm |
To Next Page
