FEATURES & GETTING STARTED:
• Before plugging in your LAX12D mixer, make certain that the available AC voltage is suitable for your device.
• Make certain that the mixer is turned off before connecting it to the mains power, and set all controls to "zero".
This will avoid damage to your speakers due to loud power-on noise and high levels.
• Always turn on the mixer rst and then the power amplier. When powering down, the sequence is reversed:
First turn off the power amplifier and then the mixer.
• Always turn off the LAX12D mixer before connecting cables.
• Do not use solvents to clean the LAX12D; use a clean, dry cloth. When powering down, the sequence is
reversed: First turn off the power amplifier and then the mixer.
• Always turn off the LAX8D mixer before connecting cables.
• Do not use solvents to clean the LAX8D; use a clean, dry cloth.
6
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS
FRANCAISFRANCAIS
ESPAÑOLPOLSKIITALIANO
To Next Page
Loading...