le-idea IDEA36 - Quick-Start Guide; Flight Controls; Basic Flight Operations; Trim Adjustments

QUICK-START GUIDE
●
Insert the drone battery. Turn on the drone switch
(Figure 1) and place it on a flat surface; the drone light
will flash.
●
Push the throttle and joystick to the lower right
corner at the same time, the buzzer will emit a "Di"
sound, and the aircraft's lights will flash and then
stay on, indicating that the leveling correction is
completed. (Figure 3)
●
Push the throttle and joystick outward at the same
time（Figure 4） to take off the drone.
●
Turn on the remote control switch (Figure 2), it will
prompt a "Di", the red light of the remote control will
be on, and the indicator of the aircraft will be on, then
the frequency matching is completed.
Figuer1
Figuer 2
Figuer3
Figuer4
HOVER UP AND DOWN
Push the THROTTLE STICK up to fly
the drone up, and pull the
THROTTLE STICK down to fly the
drone down.
FLY FORWARD OR BACKWARD
Push the DIRECTION CONTROL
STICK up to fly the drone forward,
and pull the DIRECTION CONTROL
STICK down to fly the drone backward.
FLY LEFT OR RIGHT
Move the DIRECTION CONTROL
STICK to the left to fly the drone
to the left, and move the DIRECTION
CONTROL STICK to the right to fly
the drone to the right.
ROTATE LEFT OR RIGHT
Move the THROTTLE STICK to the
left to rotate the drone to the left, and
move the THROTTLE STICK to the
right to rotate the drone to the right.
-3-
When taking off, the fuselage is offset to the rear, press and hold the fine-tuning button,
push the right joystick forward until the aircraft is stable, and release the fine-tuning
button to exit the fine-tuning function. When taking off, the fuselage is shifted forward,
press and hold the fine-tuning button, push the right joystick backward until the aircraft
is stable, and release the fine-tuning button to exit the fine-tuning function.
When taking off, the fuselage is offset to the right. Press and hold the fine-tuning button,
push the right joystick to the left until the aircraft is stable, and release the fine-tuning
button to exit the fine-tuning function. When taking off, the fuselage is shifted to the left,
press and hold the fine-tuning button, push the right joystick to the right until the
aircraft is stable, and release the fine-tuning button to exit the fine-tuning function.