2. Drain out the fule from the fule tank.
Screw off the small screw of the fule cock
and pull out the filter from the filler port.
3. Wash the filter thoroughly with diesel fule.
Loosen the fastening mut, bottom cover
and delivery discs for cleaning the deposit
carbon.
8.5 Tighten cylinder head bolt
Tightening the cylinder head bolt requires a special tool. Do not try yourself. Contanct
with - - agent.
8.6 Check the injection nozzle and fule injection pump
1. Adjust the clearance of the intake/exhaust valves.
2. Grind the intake/exhaust valves.
3. Replance the piston ring.
All these operation require special tools and skills, contact with your - - agent.
WARNING
Do not perform the injection nozzle test near an open fire or any other kind of
fire. The fule spray may ignite. Do not expose bare skin to the fule spray. The
fule may penetrate the skin and cause injury to the body. Always keep your
body away from the nozzle.
8.7 Check and refill the battery electrolyte and charge the battery
The diesel uses a 12V battery. Battery elec-
trolyte will be lost through continuous charg-
ing and discharging.
To Next Page
Loading...
