Leander THE BUDDING SUPERHERO - Special Considerations for Australia; Recommended Mattress Size; Crucial Fall Prevention Warning

31
Special for Australia
TO PREVENT FALLS,
MATTRESS BASE OF THIS
COT SHOULD BE ADJUSTED
TO THE LOWEST POSITION
BEFORE THE CHILD CAN
SIT UP.
WARNING
This cot has been manufactured for use
with a mattress which measures 650 mm
wide by 1160 mm long and 100 mm in
thickness. The width and length are speci-
ed because it is important that the gaps
between the mattress and the sides and
ends of the cot will not exceed 40 mm.
This is to minimize the risk of a child’s limb
becoming caught in the gap. The thick-
ness of the mattress has been specied to
ensure that the depth of the cot is greater
than 500 mm with the mattress base in
the lower position to minimize the risk of a
child climbing or falling out of the cot.
Recommended mattress size