LeapFrog Interactive Learning Easel - Attaching Main Components

3. Slide Connector 1 into the slot formed
by the aligned pieces A-Frame 1 and
Storage Tray 1 with the number 1 on
Connector 1 facing up.
4. Use three Screws and your Phillips-
head screwdriver to secure.
5. Slide Connector 2 into the slot
formed by the aligned pieces
A-Frame 2 and Storage Tray 2 with
the number 2 on Connector 2 facing
up.
6. Use three Screws and your Phillips-
head screwdriver to secure.
9