Need help?Do you have a question about the LeapFrog LF-30S and is the answer not in the manual?
General| Brand | LeapFrog |
|---|---|
| Model | LF-30S |
| Category | Transmitter |
| Language | English |
Protect from rain/moisture, avoid wet areas and bathtubs.
Do not open the case to avoid electrical shock.
Use only the provided power supply or approved accessory.
Avoid overloading outlets/extension cords to prevent shock.
Servicing should only be performed by qualified personnel.
Lists all components included in the LF-30S package for installation.
Connect A/V cables from transmitter to A/V device, matching colors.
Initial step: ensure the transmitter is powered off before connecting.
Connect A/V cables from transmitter's audio jacks to audio component's line out.
Connect A/V cables from receiver to TV's line in jacks, matching colors.
Connect the power adapter to the receiver and a wall outlet.
Ensure both units are on the same channel for proper operation.
Initial step: ensure the receiver is powered off before connecting.
Connect powered speakers using a Y-adapter to the receiver's audio jacks.
Connect the power adapter to the receiver and a wall outlet.
Ensure both units are on the same channel for proper operation.
Guides proper antenna orientation for optimal signal performance.
Crucial instruction: textured sides of square antennas must face each other.
Reminder to keep receiver and transmitter on the same channel.
Lists common solutions for no picture or sound issues.
Lists common solutions for interference and noisy signals.
To Next Page