Copyright © 2019, Leatt
®
CorporationCopyright © 2019, Leatt
®
Corporation
76
Fig.1 (p.2-3) - Technical Features
1.1. Visor (Peak)
1.2. PC outer shell
1.3. Ventilation Exhausts
1.4. Helmet Retention System
1.5. Chin Strap Adjustment Clip
1.6. 3D in-molded impact foam
1.7. 360° Turbine Technology
Fig.2 (p.4) - Chin Strap Adjustment
Fig.3 (p.4) - Correct Fitment
Fig.4 (p.5) - Comfort Liner Removal
Fig.5 (p.5) - Visor (Peak) Removal
GB
WARNING
Instructions
Do not make any modications to the helmet, this includes the outer shell, the inner EPS
liner or chin strap, any and all modications will void all warranties and aect the helmet’s
performance.
The liner is essential to the intended performance of the helmet.
The helmet has a limited lifespan in use and should be replaced when it shows obvious signs
of wear, e.g. change of t, cracks, rust or fraying.
The Leatt
®
DBX Helmet forms part of the protective equipment ensemble available for use by
participants in cycling activities. Always perform any cycling activity with caution and use/wear
appropriate safety equipment.
The helmet can only protect if it ts well. Therefore, try dierent sizes and choose the size
which feels right on the head. Recommended packaging for storage and transport is the
helmet box and bag provided with the helmet.
Position the straps of the helmet so that they do not cover the ears, the buckle positioned
away from the jawbone and the straps and buckle adjusted to be both comfortable and rm.
We recommend that you replace your helmet at least every ve years from the date you start
using it. Helmets may have to be replaced more frequently if they are subjected to intensive
use.
HELMET FOR PEDAL CYCLISTS, SKATEBOARDERS OR ROLLER SKATERS. THIS HELMET
SHOULD NOT BE USED BY CHILDREN WHILE CLIMBING OR DOING OTHER ACTIVITIES
WHEN THERE IS A RICK OF STRANGULATION/HANGING IF THE CHILD GETS TRAPPED
WITH THE HELMET. NO HELMET CAN PROTECT THE USER AGAINST ALL FORESEEABLE
IMPACTS. SERIOUS INJURY OR DEATH MAY OCCUR WHIST WEARING A HELMET. READ
OWNERS MANUAL BEFORE USE. FOR MAXIMUM PROTECTION, HELMET MUST BE FITTED
AND ADJUSTED PROPERLY TO THE WEARER'S HEAD IN ACCORDANCE WITH THE OWNERS
MANUAL FITTING INSTRUCTIONS. DESTROY AND REPLACE THE HELMET AFTER IMPACT –
DAMAGE CAN BE INVISIBLE. CONSTRUCTED OF EXPANDED POLYSTYRENE. HELMETS CAN
BE SERIOUSLY DAMAGED BY COMMON SUBSTANCES WITHOUT DAMAGE BEING VISIBLE
TO THE USER SUCH AS: SOLVENTS, PAINTS, ADHESIVES AND CLEANING SOLUTIONS. CLEAN
ONLY WITH MILD SOAP AND WATER. COMFORT PADDING CAN BE HAND WASHED AND
AIR DRIED.
To Next Page
Loading...
