Leatt GPX - Safety and Usage Instructions; Critical Safety Warnings; General Usage Instructions; Product Features and Components

To Next Page

To Previous Page

Corporation

14 15

WARNING

HELMET DESIGNED AND INTENDED FOR USE ONLY IN NON-

AUTOMOTIVE MOTOR SPORTS. NO HELMET CAN PROTECT

AGAINST ALL POSSIBLE IMPACTS. SERIOUS INJURY OR DEATH

CAN OCCUR EVEN WHEN WEARING THIS HELMET. FOR ADEQUATE

PROTECTION, THIS HELMET MUST FIT CLOSELY AND BE SECURELY

FASTENED. ANY HELMET SUSTAINING A VIOLENT IMPACT

SHOULD BE REPLACED. THE PROTECTION OF THIS HELMET

MAY BE SEVERELY REDUCED BY THE APPLICATION OF PAINT,

ADHESIVE STICKERS OR TRANSFERS, CLEANING FLUIDS OR OTHER

SOLVENTS. SHELL CONSTRUCTED OF CARBON, ARAMID, GLASS

FIBRES WITH EPOXY RESIN OR POLYCARBONATE / ABS AND

LINER CONSTRUCTED OF EXPANDED POLYSTYRENE. USE ONLY

MATERIALS RECOMMENDED BY THE HELMET MANUFACTURER.

READ AND FOLLOW ALL INSTRUCTIONS IN OWNER’S MANUAL.

Instructions

Do not make any modications to the Helmet, this includes the outer

shell, the inner EPS liner or chin strap, any and all modications will

void all warranties and aect the Helmet’s performance.

The helmet is suitable for use with goggles.

The liner is essential to the intended performance of the helmet.

The helmet has a limited lifespan in use and should be replaced when

it shows obvious signs of wear, e.g. change of t, cracks, rust or fraying.

The Leatt

GPX Helmet forms part of the protective equipment

ensemble available for use by participants in motorcycling activities.

Always perform any motor sport activity with caution and use/wear

appropriate safety equipment.

Fig.1 (p.4-5) - Technical Features

1.1. 3D Reinforced Structure

1.2. Ventilation Exhausts

1.3. LEATT-BRACE

Compatible

1.4. LEATT

Hydration Compatible

1.5. Chin Strap

1.6. Emergency Release

1.7. Ventilation Intake

1.8. Breakaway Visor (Peak) Screw

1.9. In-Molded Multidensity V-Foam

1.10. Ejection System Compatible

1.11. 360° Turbine Technology

Fig.2 (p.6) - Fastening the Chin Strap

Fig.3 (p.6) - Correct Fitment

Fig.4 (p.7) - Inserting LEATT

Hydration Kit

Fig.5 (p.8) - Cheek Pad Removal

Fig.6 (p.9) - Comfort Liner Removal

Fig.7 (p.10) - Visor (Peak) Adjustment and Removal

Fig.8 (p.11) - Removing Broken Breakaway Visor (Peak) Screw

Fig.9 (p.12-13) - Emergency Release Cheek Pads

Leatt GPX - Safety and Usage Instructions; Critical Safety Warnings; General Usage Instructions; Product Features and Components

Related product manuals