Copyright © 2020, Leatt
®
Corporation
8
Wipe only with a soft damp cloth in gentle soap or mild detergent in cold water,
rinse by wiping with a soft cloth damped in cold water and dry with a soft cloth.
Comfort padding can be hand washed and air dried.
Common substances applied to this product (solvent, cleaners, hair tonics,
etc.) can cause damage that may be invisible to the user and compromise the
eectiveness/safety of your Leatt
®
helmet. Always refer to the material content
label on the helmet. None of the materials used in the construction of the
product are known to contain anything that might cause an allergic reaction or
be dangerous to health.
Cleaning
This product complies with the EU Regulation for Personal Protective
Equipment (Regulation (EU) 2016/425)
Note: To view the Declaration of Conformity to PPE Regulation (EU) 2016/425
please navigate to leatt.com and select the DOCUMENTS tab on your product’s
page.
Wipe clean only
Do not machine wash
Do not bleach
Do not tumble dry
Drip dry in shade
Do not iron
To Next Page
Loading...
