Copyright © 2021, Leatt
®
Corporation
10
Wipe only with a soft damp cloth in gentle soap or mild detergent in cold water,
rinse by wiping with a soft cloth damped in cold water and dry with a soft cloth.
Comfort padding can be hand washed & air dried.
Common substances applied to this product (solvent, cleaners, hair tonics,
etc.) can cause damage that may be invisible to the user and compromise the
eectiveness/safety of your Leatt
®
helmet. Always refer to the material content
label on the helmet. None of the materials used in the construction of the
product are known to contain anything that might cause an allergic reaction or
be dangerous to health.
Cleaning
This product complies with the EU Regulation for Personal Protective
Equipment (Regulation (EU) 2016/425)
Note: To view the Declaration of Conformity to PPE Regulation (EU) 2016/425
please navigate to leatt.com and select the DOCUMENTS tab on your product’s
page.
todxmU
Hand
Wash
Do not
bleach
Do not
iron
Drip dry
in shade
Do not
tumble dry
Do not
dry clean
To Next Page
Loading...
