7. Refit the bracket fitting the bottom
hinge pin.
Replace both adjustable feet.
8. Place the door back on. Ensure the
door is aligned horizontally and
vertically so that the seals are
closed on all sides before finally
tightening the top hinge.
9. Insert the hinge bracket and screw
it to the top of the unit.
10. Use a spanner to tighten it if
necessary.
11. Put the hinge cover and the screw
cover back.
Screw
12. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom hinge.
Re-adjust the levelling feet as needed.
To Next Page
Loading...