11
Adjustment of shoulder belt
• Shoulder belts have 3 height positions
for different sized children.
• Disassemble the square buckle on the
rear of the seatback and webbing. Turn
the buckle 90 degrees to slot it through
the hole and then pull out the webbing.
• Insert the square buckle into the correct
hole for the required position.
• Turn the buckle 90 degrees to x
it in place.
CAUTION:
Before use, try to pull the shoulder belts to
check if the square buckles are x well on
the seat back.
SAFETY
1.
2.
3.
1.
2.
3.