Appendix B
< 52>
< 56>
< 60>
< 64>
RIS_TIME_ARRAY: long
RES_ARRAYI: long
WAVE_ARRAY_I: long
WAVE_ARRAY_2: long
< 88> RES_ARRAY2: long
< 72>
RES_ARRAY3: long
; length in bytes of RIS_TIME array
; an expansion entry is reserved
; length in bytes of 1st simple
; data array. In transmitted waveform,
; represent the number of transmitted
; bytes in accordance with the NP
; parameter of the WFSU remote command
; and the used format (see COMM TYPE).
; length in bytes of 2nd simple
; data array
; 2 expansion entries are reserved
; The following variables identify the instrument
< 76>
< 92>
< 96>
<112>
<114>
; 2 expansion entries
; The following variables describe the waveform and the time at
INSTRUMENT_NAME: string
INSTRUMENT_NUMBER: long
TRACE_LABEL: string
RESERVED1: word
RESERVED2: word
; which the waveform was generated.
<116>
WAVE_ARRAY_COUNT: long
PNTS PER SCREEN: long
FIRST_VALID_PNT: long
<120>
; identifies the waveform.
; number of data points in the data
; array. If there are two data
; arrays (FFT or Extrema), this number
; applies to each array separately.
; nominal number of data points
; on the screen
<124>
; count of number of points to skip
; before first good point
; FIRST_VALID POINT = 0
; for normal waveforms.
208
To Next Page
Loading...
