LECTRICEBIKES.COM | 602.715.0907 51
WARNING!
• Always remove the battery pack before performing any bicycle
inspection, maintenance, or repair.
• If you suspect that something is loose, do not ride your bicycle.
All nuts, bolts, and screws require the proper tightening force.
Too little force and the fastener may not hold securely. Too much
force and the fastener can strip threads, stretch, deform, or break.
Either way, incorrect tightening force can result in component
failure, which can cause you to lose control and crash. Take your
bicycle to a bicycle repair shop for service.
• Do not paint any components of your Lectric eBike as they may
cause premature failure of the component.
• Do not submerge your Lectric eBike or its components in water
or use a pressure washer to clean.
Caring for Your eBike
Always observe the operating and storage temperatures of your
Lectric eBike and its components. Protect motor, display, and battery
pack against extreme temperatures (e.g. from intense sunlight
without adequate ventilation). Extreme temperatures can damage
components (especially the battery pack).
Please have your Lectric eBike serviced at least once a year.
Do not tamper with your bicycle. Tampering is dened as removing
or replacing any original equipment or modifying your bicycle
in any way that may change its design and/or operation. Such
changes may seriously impair the handling, stability, and other
aspects of the bicycle, making it unsafe to ride. Tampering can
void your warranty and render your bicycle noncompliant with the
applicable laws and regulations. Lectric eBikes is not responsible
for any direct, incidental, or consequential damages. This includes,
without limitation, damages for personal injury, property damage or
economic losses due to tampering.
To ensure safety, quality, and reliability, use only original parts or
Lectric eBikes authorized replacements for repair and replacement.
To Next Page
Loading...
Need help?
General