15
- With assistance, slide a Harmony speaker cabinet onto iso
lating support blocks as shown. (Figure 10)
- Install provided tensioning screws through isolation grom
met as shown. (Note: Though the screw couples directly
into the end of the support block, the internal steel plate
isolation grommet prevent direct mechanical coupling.)
(Figure 11).
- Install plastic grill cups, tapping flush with rubber mallet or
with covered block and hammer. (Figure 12)
- Installation is now complete. Turn on your favorite DVD or
Music sit down and enjoy. Should you have further ques
tions, please consult your local dealer, or call 800 283 4644.
Speaker Installation
To Next Page
Loading...
