11
Before you purchase loudspeaker wire, check local building codes to
make sure that the wire is rated to comply with applicable local
safety codes such as UL or CL-2. Use only stranded wire no thinner
than AWG 16. For runs longer than 100 feet, we recommend mini-
mum of AWG 14. When pulling wire, take care not to pull the wire
too fast to prevent stretching the wire or scorching the insulation
from friction. Leave 2 to 3 feet of excess loudspeaker wire at both
ends; it is easier to trim off excess wire than to splice additional wire.
When securing the wire inside the walls, be careful not to pierce the
insulation with nails or staples.
Hooking Up Cables
To Next Page
Loading...
