LEGO duplo 10874 - Playing with Your Train Set; Release Battery Lid; Battery Installation and Indicators; Train Power Button Operation

1717
1. Relas btery lid 4. Push-And-Go & Hld-To-St
3. On/ff Buton
2. Bateris 5. Action Bricks
ENUS
Playing wth your tain set
1. Relas btery lid
Use a screwdriver to release the battery lid
2. Bateris
To insert batteries correctly follow the illustration.
Low batteries or overloading the train is indicated
by the front light flashing orange.
3. On/ff Buton
The green On/Off button is placed underneath the
train.
Make sure that the 4 x AAA batteries are inserted.
To turn the train On, press the green button.
Successful activation will be indicated by the front
light turning white and a short sound.
To turn the train Off the green button must be
pressed.
4. Push-And-Go & Hld-To-St
Push-And-Go and Hold-To-Stop requires that the
train is On.
To make the train go push it in the desired direction.
To stop the train you hold it by hand. The train will
also stop if movement is otherwise prevented.
5. Action Bricks
To play with the Action Bricks, it requires that the
train is On and the Action Bricks are placed on the
LEGO
®
DUPLO
®
tracks.
The Action Bricks can only be placed on the flat
curved and straight tracks.
The train can detect the Action Brick going both
forwards and backwards.
6. Conetig
the LG® DUPLO® Train p
Learn more at LEGO.com/devicecheck to find a
compatible device, download the app and find
instructions for set up.