LEGO, the LEGO logo, MINDSTORMS and the MINDSTORMS logo are trademarks of the/sont des marques de commerce du/son marcas registradas de LEGO Group. ©2018 The LEGO Group. 20171207
3. Create a Learning Sequence Using
Tutorials
A good way to learn about about the functionailty of the EV3 Brick is to explore
the Robot Educator tutorials and to combine two or three of them to create a
learning sequence.
When designing your own learning sequences, remember to allow time for:
• Building the robot, if it is not already built
• Programming the robot
• Tinkering
Example of a Learning Sequence Using Tutorials
Explore the functionality of the Color Sensor by making different things happen
based on the color detected by the sensor:
• Color Sensor Color > Multiple Switch
Examples of other Learning Sequences for EV3 Lab Only
Explore the functionality of the Color Sensor, and practice logging ambient light
values:
• Color Sensor Light > Remote Data Logging
Explore math-related concepts:
• Stop at Object > Range
• Variables > Arrays
Straight Move
Tank Move
Stop at Object
The learning sequence used in the
LEGO
®
MINDSTORMS Education
EV3 “getting started” experience.
To Next Page
Loading...
