Need help?Do you have a question about the LEGO Technic 8068 and is the answer not in the manual?
Identify and sort all LEGO Technic pieces before beginning assembly.
Group similar parts and prepare them for the building process.
Assemble main beams and connectors for the central chassis structure.
Add secondary beams to reinforce the chassis assembly.
Connect curved red beams to create the tail boom.
Connect grey beams to the tail boom for stabilizer attachment.
Assemble the base structure for the main rotor gearbox.
Incorporate pins and connectors for the gear system.
Attach the assembled gearbox housing to the main helicopter chassis.
Insert shafts into the gearbox for power transmission.
Assemble the individual legs for the helicopter's landing gear.
Build the components that attach the legs to the chassis.
Construct the framework that holds the tail rotor.
Connect the central hub for the tail rotor blades.
Connect the main chassis to the tail boom assembly.
Assemble the main body of the winch system.
Construct the drum and prepare the cable for the winch.
Assemble and attach the distinctive tail fins to the helicopter.
Construct the primary structure of the helicopter's front cockpit.
Incorporate smaller parts into the cockpit assembly.
Attach the constructed cockpit to the main helicopter body.
Attach the completed winch to the helicopter's main structure.
Build the individual arms for the main rotor blades.
Assemble parts for connecting the blades to the hub.
Attach the assembled rotor blades to the central hub.
To Next Page
General