WWW.LEGRAND.COM
TABLE OF CONTENTS
o ID ;
o Password ;
• MeterValueSampleInterval => allows you to set a value for the MeterSampleInterval setting at the charging sta-
tion before connecting to the OCPP server ;
• ConnectionTimeOut => allows you to set a value from the ConnectionTimeOut setting to the charging station
before connecting to the OCPP server ;
• HeartBeatInterval => sets a Value from HeartBeatInterval to the charging station before connecting to the OCPP
server ;
• BasicAuthentication => allows you to manage the authentication of the client/server connection ;
• Charge point configuration => allows for each charging point of the charging station to change the following
parameters individually :
o Indication of maximum current at the charging point ;
o Cable usage management (detachable cable or attached cable operation simulation) ;
o OCPP Action ;
To make it easy and automatic to read and write the file, we chose to offer an XML format. It is therefore important to
follow the XML formatting rules to change the configuration file.
If the file content does not comply with the logical formatting of the XML, the file will not be taken into account when
transferring to the communication kit from the web pages.
13
OCPPUSER GUIDE
To Next Page
Loading...