10
5. Main menu
• The “main menu” is made up of a group of graphic icons that allow to access to functions. In function of selected icon, a
description will be displayed on the display.
Fig. 11 - Main menu
The main menu allow the rapid access to measurements and settings.
•• Starting from main page, press ▲•and•▼•keys together. The menu screen is displayed.
•• Press ◄ or ► to rotate clockwise/counter clockwise to select the required function. The selected icon is highlighted
and the central part of the display shows the description of the function.
•• Press (AUT) OK to activate the selected function.
•• If some functions are not available, the correspondent icon will be disabled (shown with light grey colour).
•• Icons descriptions:
Commands menu
Enter password L-L voltages L-N voltages
Alarm status
Nominal data
Statistics
Parameters Setup
Information page
Fig. 12 - Main menu
Input/output status
•• – Settings and access to the password inserction.
••
– View of L-L voltages.
•• – View of L-N voltages.
•• – View of alarm status.
•• – Nominal data.
•• – Statistic data of the ATS operation.
•• – Input/output status.
•• – Information page.
•• – Setup menu for parameter programming (see dedicated chapter).
•• – “Commands menu” (see dedicated chapter).
To Next Page
Loading...
