13
4.2.2 LCD display
(1) Operational Status and mode
NOTICE! The display provides more functions than those described in this manual. There are
10 interfaces available in the LCD display:
ITEM Interface Description Content Displayed
01 Input
Voltage & Frequency
02 Bat. +
Voltage & Current
03 Bat. -
Voltage & Current
04 Output
Voltage & Frequency
05 Load
Load
06 Temperature
PFC/Internal temperature and ambient
temperature
07 CODE
Alarm Code (Warming Message)
08
Software version &
model
DSP version of inverter software, model
09 Bus voltage
Bus voltage ±
10 CODE
Operational Status and Mode
1. When the UPS is connecting with the Utility or Battery at cold start mode, it shows
as drawing below:
1. Operational Status and mode When the UPS at single mode, it shows “NOA” or “ECO” or
“CF”
2. Press “scroll” button, the UPS goes to next page as shown below.
To Next Page
Loading...
