8
Technical characteristics
n Power supply voltage: 230 VA+10% - 50/60 Hz
n Output voltage: 24 V=
n Max. rating: 2 A
n Max. power: 48 W
n Operating temperature: 5 to 40°C
n Protection class: IP 30
n Dimensions: 6 DIN modules
Powers the system with SELV.
Recommendation: 1 power supply for 36 directions (corresponds
to 30% of simultaneous calls max.).
0 782 89: 24 V 2 A 48 W POWER SUPPLY
Powers the solid state relay for information transfer (indicator or
audible signal).
0 035 67: AUXILIARY POWER SUPPLY
Technical characteristics
n Power supply voltage: 230 VA
n BUS output voltage: 27 V=
n BUS maximum rating: 600 mA
n Max. power: 21.5 W
n Max. consumption: 26.8 W
n Operating temperature: 5 to 40°C
n Protection class: IP 20
n Dimensions: 2 DIN modules
DEVICE PRESENTATION AND INSTALLATION
0 782 04: DOOR U
1- Terminal block for
2- Terminal block for
Technical character
n Power supply: via
n Operating tempe
n Antimicrobial
n Protection class:
n Dimensions (H x W
n Installation:
- in 1-gang (2 modul
Cat.No 0 801 41
- in surface mounting
Connection (from 15W22)
Consisting of 2 whi
green, orange or blue)
call and nurse pres
Recommendation:
(top indicator).
LE08358AB_EN.indd 8 22/06/2016 09:14
To Next Page
Loading...
