LEGRAND MyHOME - Possible Applications; Installation

98
Thermostat with display
Installer manual
3.1 Installation
Installation in a MyHOME temperature control system
Thanks to the internal sensor, the thermostat can operate as master probe of a MyHOME system. In
this case it will obtain the settings from the central unit managing the system.
Using the
+ and – keys, it is possible to enter settings different from those of the central unit; the
new settings are temporary, and will only be applied until the next central unit set-point change.
The systems consists of:
• Power supply;
• Actuators and pumps;
• Temperature control central unit;
• Thermostat with local contact for
the detection of open windows.
Example of MyHOME system
3 Possible applications
PRI
SCS
E49
PRI: 220 – 240 V~
185 – 175 mA
50/60 Hz
SCS: 27 Vdc
600 mA
230 Vac
C1 C2
ART. F430/2
1
1 2 3 4
2 43
OKC
MODE
+
–
FAN
Power supply
Central unit
Thermostat
Actuator
To the
connected loads