EasyManua.ls Logo

LEGRAND NEAT NOVO IP/4G User Manual

LEGRAND NEAT NOVO IP/4G
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NOVO
Technical Handbook
Handbook for Technical Administrators
NE41 15013-02 v2.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the LEGRAND NEAT NOVO IP/4G and is the answer not in the manual?

LEGRAND NEAT NOVO IP/4G Specifications

General IconGeneral
BrandLEGRAND
ModelNEAT NOVO IP/4G
CategoryPersonal Care Products
LanguageEnglish

Summary

Introduction to NOVO

The Main NOVO Unit

2.1 Overview

Provides a visual overview of the NOVO unit's top and bottom views, identifying key components.

2.2 Buttons

Details the three distinct buttons on the front cover: Alarm, Reset, and Extra buttons.

2.3 LEDs

Describes the six LEDs on the NOVO unit, their colors, positions, and functions.

2.4 Connectors on NOVO

Details the connectors (IP, AC, External antenna) for NOVO IP/Mobile models.

2.6 Connectors on NOVO PSTN/GSM, NOVO PSTN+ and NOVO PSTN

Details connectors (TELE, LINE, AC, External GSM antenna) for PSTN/GSM models.

2.7 External antenna

Explains the use and installation of external antennas for specific NOVO models.

2.8 On/Off button (PS1)

Details the function of the On/Off button and its relation to the backup accumulator.

2.9 Reset button

Describes the reset button's location and function for manual unit reset and reboot.

2.10 Accumulator lid

Explains how to access and replace the backup accumulator.

2.11 Mounting the SIM card

Provides instructions for inserting a SIM card into compatible NOVO models.

Indications and Signals

3.1 Visual indications

Details the front LED indications for various operational states and errors.

3.2 Acoustic indications

Details the pre-recorded sounds and voice messages the NOVO unit can play.

Alarm Functions and Events

4.1 User alarms

Covers user-initiated alarms like pressing the Alarm button or using accessories.

4.2 Technical Alarms

Lists technical alarms sent to the CMP, covering surveillance and unit status.

4.2.6 Mains failure

Details alarms related to loss of mains power and associated delays.

The Alarm Call Process

5.1 Alarm event

Defines what constitutes an alarm event and the conditions for an alarm call.

5.2 Carrier type

Lists the carrier types supported by different NOVO models (IP, Mobile, PSTN).

5.7 Examples

Provides configuration examples for alarm sequences and call types.

Programming and Configuration Modes

6.1 General

Outlines the various methods for configuring NOVO models (buttons, CMP, HAND, LPP).

6.2 Programming via buttons

Explains how to configure the unit using its physical buttons.

Important Information

Appendix A: Technical Data

Related product manuals