LEGRAND Wattstopper LMCP48 - Dark;Light Event Configuration

21
Display Description Press
Event Number: <1>
Type: <Normal Hours>
Time: <07>:<00>
Group: <1>
Program Schedule
ACTIVE DAYS
DONE DELETE SEND
Highlight SEND and press Select.
Once again, point the LMCT-100 at the infrared
sensor on the LMRD board and press Select. You
return to the Program Schedule screen, where
you can program the next event
When finished, highlight DONE and press Select to
return to the Panel Programming screen.
then
Select
Holidays
On this screen, you determine which days are designated as holidays.
Display Description Press
603981210
Schedules
Holidays
Dark/Light
Groups
Occupancy Sensors
Panel Programming
From the Panel Programming screen, highlight
Holidays and press Select
then
Select
Point to the desired
Panel IR Sensor and
press ‘Select’
Point the LMCT-100 at the infrared sensor on the
LMRD board and press Select to open the Holiday
Setup screen.
Se
lect
Holiday: <1>
Year: < 2014>
Month: <Jul>
Date: <4>
Duration: <1 day>
Holiday Setup
DONE DELETE SEND
For the Holiday parameter, select the memory
location to store the information. Then select the
date for the holiday and Duration.
Highlight SEND and press Select.
Once again, point the LMCT-100 at the infrared
sensor on the LMRD board and press Select. You
return to the Holiday Setup screen, where you can
program the next event
When finished, highlight DONE and press Select to
return to the Panel Programming screen.
then choose
SEND and
press Select
or
to move to each
parameter
or
to change the value
of the parameter
Dark/Light
On this set of screens, you assign individual dark/light events.
Display Description Press
603981210
Schedules
Holidays
Dark/Light
Groups
Occupancy Sensors
Panel Programming
From the Panel Programming screen, highlight
Dark/Light and press Select.
then
Select
Point to the desired
Panel IR Sensor and
press ‘Select’
Point the LMCT-100 at the infrared sensor on the
LMRD board and press Select to open the Dark/
Light Events screen.
Se
lect