LEGRAND Wattstopper - First Time Setup

7
No: IS-00708 Rev. B
Initialize System
First Time Setup
FIRST TIME SETUP
DEVICE SETTINGS OVERVIEW
1. First Time Setup: Click on Create Admin Password to establish a custom password. Using the keyboard, type in a password and
press check to conrm.
2. Once the Admin Password is established, press Initialize System to access the current default view with all on/all off control.
1. Access the main settings panel by clicking
on the gear icon in the top right screen
Project
Project
SETTINGS
CONFIGURATION IN DESIGN CENTER
1. Connect PoE Ethernet Bus
2. Add the Equinox 73-LCAP station to your project from the Vantage Objects: Touchscreens folder
3. Highlight station in Area View; click Congure Stations
• In Settings I System Preferences I General Preferences, make sure
Exclude Ethernet Bus when conguring stations is not checked
4. When station displays congure mode, touch to congure, tap station
- OR -
5. The station may also be congured by typing the serial number in the project le. Using this method the station will be congured
when the system is programmed.