Need help?Do you have a question about the Lehner Lifttechnik OMEGA-F and is the answer not in the manual?
General| Category | Lifting Systems |
|---|---|
| Lifting Height | Up to 6000 mm |
| Power Supply | 230V / 50Hz |
| Control | Remote Control |
| Material | Aluminum |
Guides the process of feeding and fixing the tension rope into the guide rail.
Details on feeding the support rope into the lower tube and ensuring proper engagement.
20 different errors can be determined and read.
Deletes list of errors.
The contactors K1, K2 and K11 will be controlled via the contact X4.
Defines the inverter type used.
Speed when driving in and out of a stop position.
Define the starting position the menu item "Start park pos." has to be selected.
The following conditions must be met for the lift to automatically move to the park position.
This jumper controls the operation modus.
To Next Page
