Need help?Do you have a question about the Leica ASP300 S and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | ASP300 S |
| Category | Computer Hardware |
| Language | English |
Explains various symbols used in the manual and their meanings for safe operation and identification.
Specifies that only trained laboratory personnel should operate the instrument.
Defines the primary applications of the Leica ASP300 S for tissue processing.
General safety guidelines and precautions that must be followed for instrument operation and maintenance.
Highlights critical warnings and markings on the instrument itself to prevent accidents and injuries.
Details the built-in safety mechanisms like overpressure, overcurrent, and overheating protection.
Provides a visual and textual overview of the main parts and accessories of the Leica ASP300 S.
Presents detailed technical specifications, dimensions, power requirements, and environmental ratings.
Specifies the approved reagents for use with the ASP300 S and warns against incompatible substances.
Outlines the necessary environmental conditions and space requirements for installing the instrument.
Explains how to properly connect the instrument to a power source, including voltage checks.
Provides the correct procedure for powering on the instrument and initialisation steps.
A step-by-step guide to configuring parameters before initial instrument startup.
An overview of how to access and configure various instrument settings from the start screen.
Details the configuration of system parameters, including program options, display, date/time, and instrument settings.
Explains the different user access levels (Operator, Supervisor) and security settings for the instrument.
Detailed procedures for manually or remotely draining and refilling reagent containers.
Procedures for unlocking and opening the instrument's retort safely, including signal tones.
Instructions for electronic and mechanical emergency unlocking of the retort if it fails to open normally.
Overview of the instrument's fault detection and troubleshooting system, including error messages and the Run Log.
General steps to diagnose problems, check error messages, run logs, and power status.
Addresses common issues like insufficient reagent, pressure/vacuum problems, and blockages in lines.
Introduction to the instrument's cleaning programs, including retort and paraffin cleaning.
General instructions for cleaning paraffin reservoirs, instrument exterior, and collecting tray.
Procedures for periodic cleaning of reagent containers and the reagent cabinet interior.
A comprehensive checklist for daily, weekly, monthly, and 3-monthly preventive maintenance tasks.
Guidance on contacting Leica for technical support or spare parts, including necessary information.
Explains the requirement for cleaning and decontaminating products before return or maintenance.
Guidelines for preparing tissue samples, cutting them to size, and using sharp knives.
To Next Page
