Leica M10-R - Exposure and Flash Technical Details; Exposure Metering Technicals; Exposure Modes Technicals; ISO Sensitivity Range Specs

Technical Data
EN
144
EXPOSURE
Exposure meteringExposure metering
TTL (exposure metering through the lens), with working aperture
Metering principle/methodMetering principle/method
When measuring the light reflected by the light blades of the 1. shutter
curtain onto a measuring cell: strongly center-weighted; when
measuring on the sensor: Spot metering, center-weighted measure-
ment, multi-field metering
Exposure modesExposure modes
Aperture priority mode (A): automatic shutter speed control with
manual aperture preselection
Manual (M): manual setting for shutter speed and aperture
Measuring rangeMeasuring range
At room temperature and normal humidity for ISO200 at aperture 1.0
EV-1 to EV19 at aperture 32
Flashing of the left triangular LED in the viewfinder indicates values
below the measuring range
Exposure CompensationExposure Compensation
±3 EV in 1⁄3EV increments
Automatic bracketingAutomatic bracketing
3 or 5 exposures, up to ±3EV, in 1⁄3EV increments
ISO sensitivity rangeISO sensitivity range
ISO AutoISO Auto: ISO100 to ISO50000
Manual: ISO100 to ISO50000
White balanceWhite balance
Automatic (AutoAuto), presets (DaylightDaylight, CloudyCloudy, ShadowShadow, TungstenTungsten, HMIHMI,
Fluorescent WarmFluorescent Warm, Fluorescent CoolFluorescent Cool, FlashFlash), one memory slot for manual
measurements (Gray CardGray Card), manual color temperature setting
FLASH EXPOSURE CONTROL
Flash unit connectorFlash unit connector
Via accessory shoe with central and control contacts
SynchronizationSynchronization
Optionally at the 1. or 2. shutter curtain
Flash sync timeFlash sync time
: 1⁄180s, slower shutter speeds available, automatic switchover to
TTL linear flash mode with HSS-compatible Leica system flash units if
sync time is undercut
Flash exposure meteringFlash exposure metering
Using center-weighted TTL pre-flash metering with Leica flash units
(SF40, SF64, SF26), or flash units compatible with the system with
SCA3502 M5 adapter
Flash measuring cellFlash measuring cell
2 silicon photodiodes with converging lens in the base of the camera
Flash exposure compensationFlash exposure compensation
±3 EV in 1⁄3EV increments
Displays in flash modeDisplays in flash mode (in the viewfinder only)
Flash Exposure Compensation via the flash icon LED
EQUIPMENT
WLANWLAN
WLAN function for connecting to the Leica FOTOS app. The Leica app
is available from the Apple App Store™ or the Google Play Store™.
Complies with the IEEE 802.11b/g/n standard (default WLAN
protocol), channel 1-11, encryption method: WLAN-compatible WPA™/
WPA2™, access method: infrastructure mode