EN
141
Camera operation
Settings in submenus with adjusting dials and gesture
control
Fig. 31a-h
The setting dials - in this case both have the same
function - can be used to select individual options in submenus.
If you continue turning beyond the fi rst or last submenu option on
a page, the submenu list 'jumps' by a page, i.e. the next or
previous lines appear. This also applies to the start and end of the
submenu list (=> "endless loop").
Note:
The menu and submenu options can also be set at any time by
pressing the selected menu option itself or the
SET button that
appears in the toolbar on the right.
General comments on menu control
• Settings for options that diff er from the above explanations or
include additional steps, are described in the sections dealing
with the relevant options.
• Some options may not be available, e.g. because the relevant
functions have fi xed settings in the scene modes (see p. 167),
or because they relate to the external viewfi nder available as an
accessory and it is not fi tted. These options are then indicated
by a gray function icon (instead of white) and cannot be
selected.
• The menu is normally opened at the position of the last option
set.
Fig. 31b
Fig. 31a
Fig. 31c
Fig. 31e
Fig. 31d
Fig. 31f
Fig. 31g
Fig. 31h
To Next Page
Loading...
Need help?
General
Weight and Dimensions
